Canon LV-8235 UST - Manual (Page 19)

LV-8235 UST Basic Serial Command Specifications
-16-
6.45. POINTER DOWN Command
Command “C3D” [CR]
Detail
Move down the Pointer of On-Screen Display Menu.
This command works the same as the pointer “▼” of the projector and the remote
control.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.46. ENTER Command
Command “C3F” [CR]
Detail
This command works the same as “OK” button of the projector and the remote
control.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.47. FREEZE ON Command
Command “C43” [CR]
Detail
Freeze on-screen image.
This command works the same as “FREEZE” button of the remote control for
Freeze ON, but does not work for Freeze OFF.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.48. FREEZE OFF Command
Command “C44” [CR]
Detail
Cancel Freeze mode.
This command works the same as “FREEZE” button of the remote control for
Freeze OFF, but does not work for Freeze ON.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.49. ZOOM- Command
Command “C46” [CR]
Detail
Reduce the image.
This command works the same as “ZOOM-” button of the projector top panel
Note) Zoom function is available only when On Screen Display is not shown.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.50. ZOOM+ Command
Command “C47” [CR]
Detail
Expand the image.
This command works the same as “ZOOM+” button of the projector top panel
Note) Zoom function is available only when On Screen Display is not shown.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]