Canon LV-8235 UST - Manual (Page 11)

LV-8235 UST Basic Serial Command Specifications
-8-
6.4. Operation Requirements
1) When the projector’s status is any of below, Functional Execution Commands are limited.
Projector Status Available Functional Execution Commands
In standby status C00：POWER ON
Countdown in process
C00：POWER ON → Countdown is terminated
C01：POWER OFF
C02：POWER OFF → Countdown is terminated
Cooling Down in process NONE (No Execution)
Cooling Down due to Abnormal
Temperature
NONE (No Execution)
Abnormal Temperature Status NONE (No Execution)
Abnormal Power Status NONE (No Execution)
Power Save / Cooling Down in process NONE (No Execution)
Power Save Status
C00：POWER ON
C01：POWER OFF
Auto input：On1/On2 setting
Although transmit Input source commands, Auto
input does no operate.
Note) When the status is as above, even if the projector receives other commands,
it returns [ACK] [CR].
2) Functional Execution Commands are invalid when Eco mode is selected in Standby mode of
Setting menu and projector is in standby.