Canon LV-8235 UST - Manual (Page 13)

LV-8235 UST Basic Serial Command Specifications
-10-
6.10. Computer 2 Command
Command “C06” [CR]
Detail
Select Computer2 Input
Although projector returns “OK”, Auto input is not executed with this command
while Auto input is set to On1/On2.
Note) When “Monitor out” is selected in Terminal menu, projector
returns “OK” and displays “Monitor out” on the screen by receiving this
command.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.11. Video Command
Command “C07” [CR]
Detail
Select Video Input
Although projector returns “OK”, Auto input is not executed with this command
while Auto input is set to On1/On2.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.12. VOLUME + Command
Command “C09” [CR]
Detail
Volume Up.
This command operates the same way as “VOLUME+” button of the projector and
the remote control.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.13. VOLUME – Command
Command “C0A” [CR]
Detail
Volume Down
This command operates the same way as “VOLUME-” button of the projector and
the remote control.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.14. AUDIO MUTE ON Command
Command “C0B” [CR]
Detail
Sound Mute ON.
This command works the same as “MUTE” button of the remote control for Mute
ON, but does not work for Mute OFF.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]