Canon PowerShot ELPH 115 IS - Manual (Page 221)

221
ç Contents ç Chapter Contents
8
Install a driver (first
Windows connection
only).
z z When the screen at left is
displayed, click the Start menu
on the computer, click [Control
Panel], and then click [Add a
device].
z z Double click the connected
camera icon.
X X Driver installation will begin.
X X After driver installation is
complete, and the camera
and computer connection is
enabled, the AutoPlay screen
will be displayed. Nothing will
be displayed on the camera
screen.
z z Proceed to Using
CameraWindow to Transfer
Images to a Computer
( = 225 ).
• When you are in the vicinity of an access point that
you have previously connected to, the camera will
automatically connect to it in step 3. To change access
points, select [Switch Network] from the screen that will be
displayed when the connection is being established, and
follow steps 4 – 5 in “Adding a Computer” ( = 219 ).