Canon PowerShot ELPH 115 IS - Manual (Page 214)

214
ç Contents ç Chapter Contents
X X When the target camera has
been added successfully, the
image transfer screen will be
displayed. Proceed to “Sending
Images” ( = 230 ).
• After you have accessed the Wi-Fi menu once, you can access
it again by pressing the < o> button. The recent target device
is listed first, so you can easily connect again by pressing the
< o>
buttons to choose it. To add a new device, display the
device selection screen by pressing the < q> buttons, and then
configure the setting.
If you prefer not to display recent target devices, press the
< n> button, and on the [3] tab, choose [Wi-Fi Settings] >
[Target History] > [Off].
• To add multiple cameras, repeat the above procedures starting from
step 1.
• Once a camera is added, the camera nickname will be displayed on
the screen in step 3. To connect to a camera again, simply choose
the camera nickname from the list.