Canon imagePROGRAF iPF6450 - Manual (Page 24)

5
When "Close top cover." is displayed, close the
Top Cover and press the OK button.
The sheet is held between the Platen and Back
Cover, and feeding begins.
• If a print job was received
After the paper is advanced, the printer starts printing the print job.
• If no print job was received
The printer now starts feeding the paper.
6
After printing, the printer will temporarily stop advancing the paper while the trailing edge is still in the rollers
to prevent the sheet from dropping.
Once you press the OK button, the paper can be removed.
7
Remove the sheet, keeping the front edge level as
you pull it out.
Important
• If POP Board is accidentally removed at an angle, it may scratch the printed surface.
8
Press the OK button.
Loading Sheets in the Feed Slot iPF6450
Basic Guide
Handling Paper
Handling sheets
24