Set the time to dry the printed surface longer – Canon PIXMA iP2850 User Manual

Page 184

When performing duplex printing, the inside of the printer may become stained with ink, causing the printout to
become smudged.

Perform the Bottom Plate Cleaning to clean the inside of the printer.

Note

• To prevent the inside of the printer from stains, set the paper size correctly.

Check8

Set the time to dry the printed surface longer.

Doing so gives the printed surface enough time to dry so that paper smudged and scratched are prevented.

1. Make sure that the printer is turned on.

2. Open the Canon IJ Printer Utility.

3. Select Custom Settings in the pop-up menu.

4. Drag the Ink Drying Wait Time: slide bar to set the wait time, and then click Apply.

5. Confirm the message and click OK.

184