ACR Electronics Nauticast Y1-03-0203 User Manual
Page 52
User Manual
52
Y1-03-0203 Rev.L
Creating a New Region
Parameters for setting up a new Region can be entered and saved here.
Dynamic Keys: Initial User Password Setting
[M5] [Save]
Confirm Region
Data Input
[M8] [Back]
Return to Region
Listing
Inputting Region Settings: Mode of Latitude and Longitude Input:
Example:
44 Degrees, 13.1234 minutes, North
Input Format:
N 44-13.1234
Input Modes for New Regions
Data Field
Field Description
Input Modus
Additional Information
NE LAT(1) Latitude N/E corner
Manual Input
Degrees and minutes
NE LON(1) Longitude of N/E corner
Manual Input
Degrees and minutes
SW LAT(2) Latitude of S/W corner
Manual Input
Degrees and minutes
SW LON(2) Longitude of S/W corner
Manual Input
Degrees and minutes
TrZone(3)
Transitional Zone Size
Nautical Miles
ChannAIS1 Primary AIS Channel
Manual Input
Channel Number
BandwAIS1
Bandwidth for Primary AIS
Channel
Default Setting as defined by
the channel number
ChannAIS2 Secondary AIS Channel
Manual Input
Channel Number
BandwAIS2
Bandwidth for Secondary AIS
Channel
Default Setting as defined by
the channel number
Tx/RxMode Channel Modes
Tx : Transmitting Mode
Rx: Receiving Mode
VHF Power VHF Power Settings
Low = 2 Watt
(Default for Ports)
High = 12,5 Watt (Default for
High Sea Regions)
N 1
o
19' E 0
o
12' |1>0.10|2>1.30|3>1.80nm
********** Create New Region ***********
NE LAT(1):N 0
o
0.0000' +----------1
NE LON(1):E 0
o
0.0000' | +------+ |
SW LAT(2):N 0
o
0.0000' | | | |
SW LON(2):E 0
o
0.0000' >|3|< | |
TrZone(3): 5nm | +------+ |
ChannAIS1:2087 2----------+
BandwAIS1: Default
ChannAIS2:2088
BandwAIS2: Default
Tx/RxMode: TxA/TxB,RxA/RxB
VHF Power: High
----------------------------------------
| Save | | | Back