AVerMedia Technologies AVERDIGI EB1304 User Manual
Page 26
20
OSD MENU
Description
1
2
3
4
5001
5005
NETWORK SETUP
IP MODE
NW ENABLE
VIDEO PORT
UPGARDE PORT
STATIC
When DVR system gets an IP address from DHCP
server, the information will display as below:
192.168.153.254
192.168.153.1
00.00.00.00.00.00
NETWORK INFORMATION
IP ADDRESS
SUB NET
GATEWAY
DNS
MAC ADDRESS
192.168.153.100
255.255.255.255
PPPOE: Point-to-Point Protocol over Ethernet is a
r encapsulating in
mes. It is used maservices. If your network is using ADSL service
connecting to internet, and then, select PPPOE
mode. Use
▲
and
▼
buttons to go up and
down and select PPPOE, and then press
or
▼
to make selection. A message window will
show up as below:
GET IP NOW! WAITING...
When DVR system get an IP address, the
information will display as below:
192.168.153.254
192.095.000.001
00.00.00.00.00.00
NETWORK INFORMATION
IP ADDRESS
SUB NET
GATEWAY
DNS
MAC ADDRESS
CHANGE
000.000.000.000
000.000.000.000
NW ENABLE:
Allow internet remote user to playback or monitor the
channels. Without enabling the network function, the
channels cannot be playback or monitor from remote
site.
i
F
1 is Channel 1 F 2 is Channel 2
F
3 is Channel 3 F 4 is Channel 4
Use
▲
and
▼
buttons to go up and down and
select NW ENABLE (network enable), and then
press
or
▼
and
▼
to move to the selection
.
Use
▲
and
▼
buttons to change the selections