AVerMedia Technologies AVERDIGI EB1304 User Manual
Page 21
15
OSD MENU
Description
SET NW PASSWORD
CURRENT
NEW
CONFIRM
2006 / 04 / 20
17 : 54 : 50
ON
ON
ON
OFF
NO
SUBMENU
PASSWORD CHANGE
VIDEO ADJUSTMENT
DATE
TIME
AUTO RECORD
AUTO SCAN
PASSWORD SETUP
AUDIO RECORD
AUDIO MUTE
NTSC
OFF
1
VIDEO SYSTEM
MUTIPLE REMOTE
REMOTE ID
VIDEO ADJUSTMENT :
Select the camera number and set to adjust the video
brightness, contrast, hue, and saturation value
1
050
050
000
024
MODE 1
VIDEO ADJUSTMENT
CAMERA
BRIGHTNESS
CONTRAST
HUE
SATURATION
COLOR PHASE
NO
RESET TO DEFAULT VALUE
DATE :
Set the current date
TIME :
Set the current time
AUTO RECORD :
Enable/disable auto continue recording when
interrupted (i.e., power breakdown, video playback or
configuration setup). It continue recording after 10
second of idleness. This is applicable in Always Record
mode
AUTO SCAN :
Enable/disable auto cycle switch to display the next
channel when in full screen preview. User can set
different switch time for each channel. The time range
is from 5 ~30 seconds.
OFF
10 SEC
10 SEC
10 SEC
10 SEC
AUTO SCAN
AUTO SCAN
CHANNEL - 1
CHANNEL - 2
CHANNEL - 3
CHANNEL - 4
PASSWORD SETUP :
Enable/disable full system password protection. This
would prevent unauthorized user to stop video
recording, change system settings and formatting the
hard disk