Brother MFC-9450CDN - Manual (Page 69)

Telephone services and external devices
53
7
Using remote codes
7
Fax Receive Code
7
If you answer a fax call on an extension or
external telephone, you can tell your machine
to receive it by pressing the fax receive code
l
51. Wait for the chirping sounds then
replace the handset. (See Easy
receive on page 44.)
If you answer a fax call at external telephone,
you can make the machine receive the fax by
pressing Black Start.
Telephone Answer Code
7
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T
(double-ring) after the initial ring delay. If you
pick up the call on an extension telephone
you can turn the F/T ring off by pressing #51
(make sure you press this between the rings).
If the machine answers a voice call and
pseudo/double-rings for you to take over, you
can take the call at the external telephone by
pressing Hook.
Changing the remote codes
7
The preset fax receive code is l51. The
preset telephone answer code is #51. If you
are always disconnected when accessing
your external TAD, try changing the
three-digit remote codes, for example ###
and 999.
a
Make sure you are in Fax mode .
b
Press Menu 2, 1, 4.
Setup Receive
4.Remote Codes
c
Press a or b to choose On (or Off).
Press OK.
d
If you chose On in c, enter the new Fax
Receive Code.
Press OK.
e
Enter the new Telephone Answer Code.
Press OK.
f
Press Stop/Exit.