5 check the print quality, 6 choose your language (if needed), Check the print quality – Brother DCP-585CW User Manual
Page 6: Choose your language (if needed)
6
5
Check the print quality
a
When the preparation process has finished, the
LCD shows this message
.
Press Color Start.
b
Check the quality of the four color blocks
a
on
the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press
(Yes)
to finish the quality check.
If you can see missing short lines, press
d.
d
The LCD asks you if the print quality is OK for
black and color. Press
(Yes) or
(No).
After pressing
(Yes) or
(No) for both
black and color, the LCD shows:
e
Press (Yes), the machine will then start
cleaning the colors.
f
After cleaning is finished, press Color Start.
The machine starts printing the Print Quality
Check Sheet again. Go back to
6
Choose your language
(If needed)
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Local Language.
Press OK.
d
Press a or b to choose your language.
Press OK.
e
Press Stop/Exit.
OK
Poor
Set Paper and Press
Start
11
Black OK?
Yes
Press
Press
No
Start Cleaning?
Yes
Press
Press
No