Brother DCP-585CW - Manual (Page 42)

42
For Wireless Network Users
Restore the network settings to factory default
To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below.
a
Make sure the machine is not operating, then disconnect all the cables from the machine (except the power
cord).
b
Press Menu.
c
Press a or b to choose Network.
Press OK.
d
Press a or b to choose Factory Reset.
Press OK.
e
Press to choose Yes.
f
Press to choose Yes.
g
The machine will restart, re-connect cables once this is complete.
Entering Text for Wireless Settings
Press a or b repeatedly to select a character from the list below:
abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
(space)!"#$%&'() +,-./:;<=>?@[\]^_`{|}˜
Pressd or c repeatedly to move the cursor.
Note
Making corrections
If you entered an incorrect letter and want to change it, press d or c to position the cursor under the incorrect
letter. Use the a and b keys to change to the correct letter, then press c repeatedly to move the cursor back
to the end of the text.