Brother HL-S7000DN - Manual (Page 16)

Printing Methods
10
1
Note
For Legal or Folio size paper, you need to change the position of the output stopper. To move the stopper
to the Legal position press the release buttons (1) on the base of the stopper and remove it. Then slide
the cover towards the back of the machine as shown. Put the output stopper back on the machine in the
area exposed by moving the cover.
f
Choose the following settings from each drop-down list of the printer driver.
For the acceptable paper sizes, see Type and size of paper uu page 3.
For other settings, see Driver and Software in Chapter 2.
 Paper Size
A4 Letter Legal Executive
A5 B5
(JIS) Folio A5 Long Edge
(Tray 1 only)
 Media Type
Plain Paper Thin Paper Recycled Paper
 Paper Source
Tray1 Tray2
(if available) Tray3
(if available) Tray4
(if available)
Tray ID 1 Tray ID 2 Tray ID 3 Tray ID 4
1