Brother FAX-5750e - Manual (Page 77)

7 - 2 A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
ZleMFC-US-FAX-4750e/5750e-
Storing Speed Dial Numbers
You can store Speed Dial numbers, so you can dial by pressing only six keys
(Search/Speed Dial, #, and the Speed Dial location, and Fax Start).
E-mail addresses can be stored in locations 01-100.
1
Press Menu, 2, 3, 2.
2
Use the dial pad to enter a Speed Dial
location, and then press Set. (01–200)
3
Enter the number (up to 20 digits) and
then press Set.
4
Use the dial pad to enter the name (up to
15 characters), and then press Set.
You can use the chart on Page 4-4 to help
you enter letters—OR—Press Set to store the number without a name.
5
Return to Step 2 to store another Speed Dial number—OR—Press Stop/Exit.
Changing One Touch and Speed Dial Numbers
If you try to store a One Touch or Speed Dial number in a location where a
number is already stored, the LCD shows the current name stored at that
location, then prompts you to either
1
Press 1 to change the number, or press 2 to exit without changing it.
2
Enter a new number and then press Set.
■ If you want to erase the number, press Clear when the cursor is to the left of the
digits.
■ If you want to change a digit, use or to position the cursor under the digit
you want to change, then type over it.
3
Follow the directions beginning at Step 4 for Storing One Touch Numbers or
Storing Speed Dial Numbers.
2 . S P E E D - D I A L
S P E E D - D I A L ? #
E N T E R & S E T K E Y
# O O 5 :
E N T E R & S E T K E Y
N A M E :
E N T E R & S E T K E Y
* O 1 : B R O T H E R
1 . C H A N G E 2 . E X I T