Brother FAX-5750e - Manual (Page 124)

F O R D O S U S E R S ( F O R F A X - 5 7 5 0 E O N L Y ) 13 - 2
ZleFB_MFC9800-FM5.5
Installing the Remote Printer Console
Before you install the program, make sure you have the following hardware and
software to install the program:
Follow these steps to install the remote printer console program:
1
Make sure your Brother machine is connected to your computer and is set to
Online.
2
Start your computer and go to the DOS prompt. If you are in Windows
®
, exit
and return to the DOS prompt.
3
Insert the Brother CD-ROM into your CD-ROM drive.
4
At the DOS prompt (C:\>) type x: (Substitute the drive letter of your CD-ROM
drive for “x”), and then press Enter.
5
Type CD DOS, and then press Enter.
6
Type RPCSETUP, and then press Enter.
7
Follow the instructions in the installer.
Using the Remote Printer Console Main Program
Type C:\RPCX>RPCX, and then press the Enter key to start the Remote
Printer Console main program.
DOS Version 3.3 or later
Monitor EGA/VGA or compatible
Option Mouse; the mouse driver must be installed.
(You can also operate the program with the keyboard.)
Do not use this program from a DOS window running under Windows.
C:\>x:
x:\>CD DOS
x:\DOS>RPCSETUP