Brother DCP 9040CN - Manual (Page 60)

48
e
Hold the DIMM by the edges and align
the notches in the DIMM with the
protrusions in the slot. Insert the DIMM
diagonally (1), then tilt it toward the
interface board until it clicks into
place (2).
f
Put the DIMM covers (2 and 1) back on.
g
Plug the machine’s power cord back into
the AC power outlet first, and then
connect the interface cable.
h
Turn on the machine’s power switch.
Note
To make sure that you have installed the
SO-DIMM properly, you can print the User
Settings List that shows the current memory
size. (See User Settings List on page 23.)
1 2
2
1