Brother DCP 9040CN - Manual (Page 149)

Menu and features
137
D
3.Printer
(continued)
6.Auto Regist. 1.Registration 1.Start Adjust the print position of
each color automatically. See
Software
User’s
Guide on
the
CD-ROM.
2.Exit
2.Frequency Low
Medium*
High
Off
Set the interval time you
want to carry out the auto
registration.
7.Manual Regist. 1.Print Chart — Print the chart to manually
check the registration of
the colors.
2.Set Regist. 1 Magenta Left
2 Cyan Left
3 Yellow Left
4 Magenta Center
5 Cyan Center
6 Yellow Center
7 Magenta Right
8 Cyan Right
9 Yellow Right
Sets the correction value
on the chart you printed
from Print Chart.
4.LAN 1.TCP/IP 1.BOOT Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best suits
your needs.
(If you choose Auto,
RARP, BOOTP or DHCP,
you will be asked to enter
how many times the
machine tries to obtain the
IP address.)
See
Network
User’s
Guide on
the
CD-ROM.
2.IP Address [000-255].
[000-255].
[000-255].
[000-255] Enter the IP address.
3.Subnet Mask [000-255].
[000-255].
[000-255].
[000-255] Enter the Subnet mask.
4.Gateway [000-255].
[000-255].
[000-255].
[000-255] Enter the Gateway
address.
5.Node Name BRNXXXXXX Enter the Node name.
6.WINS Config Auto*
Static
Chooses the WINS
configuration mode.
Main Menu Submenu Menu Selections Options Descriptions Page