Brother MW-120 - Manual (Page 35)

20
Indicator lights
„ Status indicator light
A green light indicates the printer is operating
correctly, while red indicates an error has
occurred.
If an error has occurred, check for the following causes.
If a system error has occurred:
The printer may be damaged. Contact the sales representa-
tive where it was purchased.
Indicator
light color
Indicator light
status
Printer status
Green
Constantly lit Waiting to receive data
Flashing Receiving data
Red
Flashing An error has occurred.
Constantly lit A system error has occurred.
Error description Remedy
There is no paper cassette
installed.
The paper cassette is
installed facing the wrong
direction.
There is no more paper.
Correctly install a paper cas-
sette containing paper.
A paper misfeed occurred. Remove the misfed paper.
A transmission error occurred. Check the transmission status.
An overheat error occurred.
The inside of the printer has
started to overheat. Wait until it
cools down