Brother MW-120 - Manual (Page 32)

Appendix
17
Paper sizes (print area)
Troubleshooting
Symptoms & remedies
Normal type
A7 size: 2.9" (74 mm) × 4.1" (105 mm)
(2.7" (69 mm) × 3.9" (100 mm))
Label sheets
(four down)
2.9" (74 mm) × 1.0" (26.25 mm)
(2.7" (69 mm) × 0.8" (21.25 mm))
Label sheets
(two down)
2.9" (74 mm) × 2.1" (52.5 mm)
(2.7" (69 mm) × 1.9" (47.5 mm))
Symptom: The printer
cannot be turned on.
Remedy: Press and hold the power button
for a short while. (
→ Refer to page 5.)
Remedy: The built-in lithium ion battery
needs recharging. (
→ Refer to page 3.)
Symptom: Although the
print command was
issued, the printer
does not print.
With an IrDA connection:
Remedy: Make sure that there is no
obstacle between this printer and the
PDA, and check that they are within
7.9" (20 cm) of each other. (
→ Refer
page 10.)
Remedy: Disconnect the USB cable. (
→
Refer to page 10.)
Remedy: Disconnect the serial cable.
With a USB connection:
Remedy: Check that this printer is
securely connected to the computer
with the USB cable. (
→ Refer to page
11.)
With a serial connection:
Remedy: Check that this printer is
securely connected to the computer
with the serial cable.
Symptom: There is a
paper misfeed.
Remedy: Remove the paper. (
→ Refer to
page 12.)