Brother MW-120 - Manual (Page 20)

Operating Procedures
5
Turning on the printer
1
Press and hold the power
button for a short while,
until the green status indi-
cator light illuminates.
If the power button is pressed again, the
printer is turned off.
• In order to prevent this printer from accidentally
being turned on, it will not come on if the power
button is lightly pressed. Therefore, if the printer
does not come on, hold the power button pressed
for a little while.
• In order to conserve the built-in lithium ion battery,
the printer automatically goes off if no operation is
performed or if no data is sent to it for five minutes
(except when the battery is being charged with
the AC adapter).