Macintosh, For usb interface cable users, For mac os® x 10.2.4 or greater – Brother MFC 7840W User Manual

Page 31: For mac os, X 10.2.4 or greater, Installing the driver & software, Important, Improper setup

Installing the Driver & Software

Macintosh

Mac

int

USB

For USB Interface Cable Users

For Mac OS

X 10.2.4 or greater

Important

Make sure that you have finished the
instructions from step 1 Setting Up the
Machine on pages 4 through 11.

Note

For Mac OS

X 10.2.0 to 10.2.3 users, upgrade to

Mac OS

X 10.2.4 or greater. (For the latest

information for Mac OS

X, visit

http://solutions.brother.com/)

Plug the AC power cord into an AC outlet. Turn
the power switch on.

Connect the USB interface cable to your
computer, and then connect it to the machine.

Improper Setup

DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.

Turn on your Macintosh

Put the supplied CD-ROM into your CD-ROM
drive.

Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.

Note

Please see the Software User’s Guide on the CD-
ROM if you want to install the PS driver.

Choose Local Connection (USB), and then
click Next. The installation will continue.

Note

Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.