5 apm configuration, Apm configuration -26, Power button mode [on/off – Asus Z7S WS User Manual
Page 98: Restore on ac power loss [power off, Power on by external modems [disabled, Power on by pcie devices [disabled, Power on by pci devices [disabled
4-26
Chapter 4: BIOS setup
4.5.5
APM Configuration
Power Button Mode [On/Off]
When set to [On/Off], the system shuts down while pressing the Power button.
When set to [Suspend], the system goes suspend while pressing the Power button.
Configuration options: [On/Off] [Suspend]
Restore on AC Power Loss [Power Off]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system goes on after an AC power loss. When set to
[Last State], the system goes into either off or on state, whatever the system state
was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By External Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the first
try. Turning an external modem off and then back on while the computer is off
causes an initialization string that turns the system power on.
Power On By PCIE Devices [Disabled]
Allows you to enable or disable the PCIE devices to generate a wake event.
Configuration options: [Disabled] [Enabled]
Power On By PCI Devices [Disabled]
Allows you to enable or disable the PME to wake up from S5 by PCI devices.
Configuration options: [Disabled] [Enabled]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
BIOS SETUP UTILITY
Power
APM Configuration
Power Button Mode
[On/Off]
Restore on AC Power Loss
[Power Off]
Advanced Resume Event Controls
Power On By External Modems
[Disabled]
[Disabled]
Power On By PCIE Devices
[Disabled]
Power On By PCI Devices
[Disabled]
[Disabled]
Power On By RTC Alarm
[Disabled]
Power On By PS/2 Keyboard
[Disabled]
PS/2 Keyboard
[Disabled]
Go into On/Off,
or Suspend when
Power button
is pressed.