Brother MFC-5460CN - Manual (Page 16)

Windows ® Internet printing
11
2
i Press OK to continue. You will then be asked to re-start your computer.
j Once your computer has re-started you must create a printer on your Windows
®
98/98SE/Me/2000/XP/XP Professional x64 Edition system using the standard Windows ® printer setup
procedure. To do this, go the Start button and select Settings and then Printers (Windows
®
98/98SE/Me/2000). For Windows
®
XP/XP Professional x64 Edition users, go to the Start button, select
Printers and Faxes.
k Select Add Printer (or Add a Printer for Windows
®
XP/XP Professional x64 Edition) to begin the printer
installation.
l Click Next when you get the Add Printer Wizard window.
m Depending on the OS-version you are using, the operations differ. Do one of the following.
„ For Windows
®
98/98SE/Me users
Select Local Printer when you are asked how the printers are connected to your computer and click
Next.
„ For Windows
®
2000/XP/XP Professional x64 Edition users
Select Local Printer and delete the check mark in Plug and Play check box. Then click Next.
n Depending on the OS-version you are using, the operations differ. Do one of the following.
„ For Windows
®
98/98SE/Me users
1 Select the desired model of the remote printer (for example, Brother HL-series). If necessary, click
Have Disk to load the driver from the CD-ROM. Click Next when you are done.
2 If you have selected a printer driver that is already being used, you have the option of either
keeping the existing driver (recommended) or replacing it. Select the desired option and press
Next.
3 Select the Brother Internet port (BIP...) which you selected in f and press Next.
„ For Windows
®
2000/XP/XP Professional x64 Edition users
1 Select the Brother Internet port (BIP...) which you selected in f and press Next.
2 Select the desired model of the remote printer (for example, Brother HL-series). If necessary, click
Have Disk to load the driver from the CD-ROM. Click Next when you are done.
3 If you have selected a printer driver that is already being used, you have the option of either
keeping the existing driver (recommended) or replacing it. Select the desired option and press
Next.
4 Enter any desired name for the BIP remote printer and press Next. Note that this name does not
need to match the port name that you assigned in f, or E-mail address that you assigned in i.
5 Select No when asked if you want to print a test page, unless you have already configured the
remote print server to receive BIP print jobs.
You have now finished installing the BIP software. If you need to configure another remote print server, go to
the next section, Adding a Second Brother Internet Port on page 12.