Brother MFC-5895CW - Manual (Page 27)

Loading paper and documents
11
2
g
Close the output paper tray cover.
Check that the paper is flat in the tray
and below the maximum paper mark (1).
h
Slowly push the paper tray completely
into the machine.
Note
DO NOT push Tray #1 into the machine too
quickly. Doing this may cause injury to your
hand by trapping it between Tray #1 and
Tray #2. Please push Tray #1 in slowly.
i
While holding the paper tray in place,
pull out the paper support (1) until it
clicks, and then unfold the paper
support flap (2).
Note
When you shorten tray#1, take the paper
out of tray. Then shorten the tray by
pressing the universal guide release
button (1).
Adjust the paper length guide (2) to fit the
paper size you are using and then put the
paper in the tray.
1
1
2
1 1
2