Brother MFC-5895CW - Manual (Page 25)

9
2
2
Loading paper and
other print media
2
Note
(MFC-6490CW only)
• For Tray #2, see Loading paper in paper
tray #2 (MFC-6490CW only) on page 12.
• If the tray used for Fax mode is set to
Auto Select you should open and close
the scanner cover to reset the machine
after refilling paper tray#1.
Loading paper in paper
tray #1
2
a
If the paper support flap is open, close it,
and then close the paper support. Pull
the paper tray completely out of the
machine.
Note
• When you are using Legal, Ledger or A3
size paper, press and hold the universal
guide release button (1) as you slide out
the front of the paper tray.
• If you are using A5 or smaller size paper,
make sure that the paper tray is not extended.
b
Open the output paper tray cover (1).
Loading paper and documents
2
11 1
1