beautypg.com

Brother MFC-J835DW User Manual

Page 85

background image

Troubleshooting

71

B

Ink Absorber NearFull

The ink absorber box or flushing box is
nearly full.

The ink absorber box or flushing box
will need to be replaced soon. Call
Brother Customer Service or a Brother
Authorized Service Center to have
your machine serviced. (See Brother
numbers
uu page i
.)

Ink low

One or more of the ink cartridges are
near the end of their life. If a sending
machine has a color fax to send, your
machine’s “handshake” will ask that
the fax be sent as black & white. If the
sending machine has the ability to
convert it, the color fax will be printed
at your machine as a black & white
fax.

Order a new ink cartridge. You can
continue printing until the LCD shows
Cannot Print. (See Ordering
accessories and supplies
uu page ii
and Replacing the ink cartridges
uu

page 61.)

Low Temperature

The print head is too cold.

Allow the machine to warm up.

Media Error

The memory card is either corrupted,
improperly formatted, or there is a
problem with the memory card.

Put the card firmly into the slot again to
make sure it is in the correct position.
If the error remains, check the media
drive (slot) of the machine by putting in
another memory card that you know is
working.

Media is Full.

The memory card or USB Flash
memory drive you are using has no
available space or already contains
999 files.

Your machine can only save to your
memory card or USB Flash memory
drive if it contains less than 999 files.
Delete unused files to free some
space and try again.

No Caller ID

There is no incoming call history. You
did not receive calls or you have not
subscribed to the Caller ID service
from your telephone company.

If you want to use the Caller ID feature
call your telephone company.
(uuAdvanced User’s Guide: Caller
ID
)

No File

The memory card or USB Flash
memory drive in the media drive does
not contain a .JPG file.

Put the correct memory card or USB
Flash memory drive into the slot again.

No Ink Cartridge

An ink cartridge is not installed
properly.

Take out the new ink cartridge and
re-install it slowly until it clicks.
(See Replacing the ink cartridges
uu

page 61.)

Error Message

Cause

Action

This manual is related to the following products: