Brother MFC-3820CN - Manual (Page 84)

SETUP SEND 6 - 4
Out of Memory message
If you get an Out of Memory message while scanning the first page
of a fax, press Stop/Exit to cancel the scan. If you get an Out of
Memory message while scanning a subsequent page, you will have
the option to press Black Start to send the pages scanned so far,
or to press Stop/Exit to cancel the operation.
Automatic transmission
This is the easiest way to send a fax.
1
If it is not illuminated in green, press ( Fax ).
2
Load your original. (See Load originals on page 2-1.)
3
Enter the fax number using the dial pad, Speed-Dial or Search.
(See How to dial on page 6-1.)
3
Press Black Start or Color Start .
■
If the memory is full and you are faxing a single page, it will
be sent in real time.
■
If you need to cancel before the fax is sent, press Stop/Exit .
You cannot send multiple pages for color faxes.
If the memory is full and you are faxing a single page, it will be
sent in real time.
Do not pick up the hand set of the external phone or press Hook
to listen for a dial tone.