Brother MFC-7440N - Manual (Page 35)

Control panel setup
27
3
Restoring the network settings to factory default
3
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all network settings to the factory default.
a
Press Menu.
b
Press a or b to choose LAN.
Press OK.
c Press a or b to choose Factory Reset.
Press OK.
d (For MFC-7440N)
Press 1 to choose Reset.
(For DCP-7045N)
Press a to choose Reset.
e
(For MFC-7440N)
Press 1 to choose Yes for reboot.
(For DCP-7045N)
Press a to choose Yes for reboot.
f The machine will re-start. You can now reconnect the network cable and configure the network settings
to work with your network.