Brother MFC-7440N User Manual
Network user’s guide
NETWORK
USER’S GUIDE
Multi-Protocol On-board Ethernet Multi-function Print Server
MFC-7440N
MFC-7345N
DCP-7045N
Please read this manual thoroughly before using this machine on
your network. You can view this manual in HTML format from the
CD-ROM at any time, please keep the CD-ROM in a convenient
place for quick and easy reference at all times. You can also
download the manual in PDF format from the Brother Solutions
Center
The Brother Solutions Center your one stop resource for all your printing needs. Download the
latest drivers and utilities for your machine, read FAQs and
troubleshooting tips or learn about special printing solutions.
Note: Not all models are available in all countries.
Version C
ENG
This manual is related to the following products:
Table of contents
Document Outline
- NETWORK USER’S GUIDE MFC-7440N MFC-7345N DCP-7045N
- Table of Contents
- 1 Introduction
- 2 Configuring your machine for a network
- Overview
- IP addresses, subnet masks and gateways
- Step by step chart
- Setting the IP address and subnet mask
- Changing the print server settings
- Using the BRAdmin Light utility to change the print server settings
- Using the BRAdmin Professional 3 utility to change print server settings (for Windows®)
- Using the control panel to change the print server settings
- Using Web Based Management (web browser) to change the print/scan server settings
- Using Remote Setup to change the print server settings (not available for Windows Server® 2003) (for MFC-7440N)
- Using other methods to change print server settings
- 3 Control panel setup
- 4Driver Deployment Wizard (Windows® only)
- 5 Network printing from Windows®: basic TCP/IP Peer-to-Peer printing
- 6 Internet printing for Windows®
- 7 Network printing from Macintosh®
- 8 Web Based Management
- 9 Security features
- 10 Troubleshooting
- Appendix A
- Using services
- Other ways to set the IP address (for advanced users and administrators)
- Using DHCP to configure the IP address
- Using BOOTP to configure the IP address
- Using RARP to configure the IP address
- Using APIPA to configure the IP address
- Using ARP to configure the IP address
- Using the TELNET console to configure the IP address
- Using the Brother Web BRAdmin server software for IIS to configure the IP address
- Installation when using web services (For Windows Vista® users)
- Installation when using a Network Print Queue or Share (printer driver only)
- Appendix B
- Index