Brother MFC-9320CW - Manual (Page 30)

30
Windows
® Wireless Network
Configuration using the Installation CD-ROM and temporarily using a USB cable
(Windows
®
only)
19
Configure the wireless
settings
a
Put the installation CD-ROM into your CD-ROM
drive. If prompted, select your model and language.
b
Click Initial Installation and then Install
MFL-Pro Suite.
c
Click Yes if you accept the license agreement.
Follow the on-screen instructions.
d
Choose Wireless Network Connection and
then click Next.
e
For Windows
®
XP SP2 or greater/XP
Professional x64 Edition/ Windows Vista
®
/
Windows ® 7 users, when this screen appears,
choose Change the Firewall port settings to
enable network connection and continue
with the installation. (Recommended) and
click Next.
If you are not using the Windows ® Firewall, see
the user's guide of your firewall or antivirus
software for information on how to add the
following network ports.
 For network scanning, add UDP port 54925.
 For network PC-Fax receiving, add UDP port
54926.
 If you still have trouble with your network
connection, add UDP port 137.
f
Choose Use your computer or the control
panel directly and click Next.
g
Choose Temporarily use a USB cable
(Recommended) and then click Next.
IMPORTANT
You need to temporarily use a USB cable
during configuration (cable not included).
Note
If the Brother screen does not appear automatically,
go to My Computer (Computer), double-click the
CD-ROM icon, and then double-click start.exe.
Note
For Windows Vista ® and Windows ® 7, when the
User Account Control screen appears, click
Allow or Yes.