Brother MFC-J835DW - Manual (Page 22)

Chapter 4
16
IMPORTANT
• If you choose Backup Print:On, the
machine will also print the fax at your
machine so you will have a copy. This is a
safety feature in case there is a power
failure before the fax is forwarded or a
problem at the receiving machine.
• When you receive a color fax, your
machine prints the color fax at your
machine but does not send the fax to the
fax forwarding number you programmed.
k
Press Stop/Exit.
Paging
4
When you choose Paging, your machine
dials the cell phone or pager number you
have programmed. This activates your cell
phone or pager so you will know that you
have a fax message in the memory.
If you have set Paging, a backup copy of the
received fax will automatically be printed at
the machine.
a
Press Menu.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Receive.
e
Press Setup Receive.
f
Press a or b to display
Memory Receive.
g
Press Memory Receive.
h
Press Paging.
i
Enter your cell phone or pager number
followed by # # (up to 20 digits).
Press OK.
Do not include the area code if it is the
same as that of your machine.
For example, press:
1 8 0 0 5 5 5 1 2 3 4 # #.
j
Do one of the following:
 If you are programming your cell
phone number and do not need to
enter a PIN, press OK.
 If your pager needs a PIN, enter the
PIN, press #, press Pause, and then
enter your fax number followed by
# #.
Press OK.
For example, press:
1 2 3 4 5 # Pause 1 8 0 0 5 5 5 6 7
8 9 # #
 If you do not need a PIN, press:
Pause, and then enter your fax
number followed by # #. Press OK.
For example, press:
Pause 1 8 0 0 5 5 5 6 7 8 9 # #
k
Press Stop/Exit.
Note
You cannot change a paging number or
PIN remotely.