Brother MFC-J835DW - Manual (Page 10)

Chapter 1
4
LCD screen
1
Setting the backlight
brightness
1
You can adjust the brightness of the LCD
backlight. If you are having difficulty reading
the LCD, try changing the brightness setting.
a
Press Menu.
b
Press a or b to display
General Setup.
c
Press General Setup.
d
Press a or b to display LCD Settings.
e
Press LCD Settings.
f
Press Backlight.
g
Press Light, Med or Dark.
h
Press Stop/Exit.
Setting the Dim Timer for the
backlight
1
You can set how long the LCD backlight stays
on after you go back to the Ready screen.
a
Press Menu.
b
Press a or b to display
General Setup.
c
Press General Setup.
d
Press a or b to display LCD Settings.
e
Press LCD Settings.
f
Press Dim Timer.
g
Press 10 Secs, 20 Secs, 30 Secs or
Off.
h
Press Stop/Exit.
Mode Timer
1
The machine has four temporary mode keys
on the control panel: FAX, SCAN, COPY and
PHOTO. You can change the amount of time
the machine takes after the last Scan, Copy
or PhotoCapture operation before it returns to
FAX mode. If you choose Off, the machine
stays in the mode you used last.
a
Press Menu.
b
Press a or b to display
General Setup.
c
Press General Setup.
d
Press a or b to display Mode Timer.
e
Press Mode Timer.
f
Press 0 Sec, 30 Secs, 1 Min,
2 Mins, 5 Mins or Off.
g
Press Stop/Exit.