Step 2, Installing the drivers & software, For network interface cable users – Brother MFC-9420CN User Manual

Page 34

Text mode
Original mode

Plug in the power cord and turn on the
machine.

Select Network and then click OK.

If you want to use the Scan key on the
machine, you must check Register your
computer with the "Scan To" functions
at the machine box and enter a name you
want to use for your Macintosh

in Display

Name.
The name can be any name you want up to
15 characters.
(For more information on network scanning,
see Chapter 10 of the Software User's
Guide on the CD-ROM.)

Click Browse.

Select your model name, and then click OK.
Click OK again to close the
DeviceSelector.

Select Applications from the Go menu.

Open the Utilities folder.

For Network Interface Cable Users

Step 2

Installing the Drivers & Software