Brother MFC-9460CDN - Manual (Page 3)

3
2 Remove the packing
material from the
machine
a
Remove the packing tape from the outside of
the machine.
b
Open the MP tray a , and remove the plastic
sheet b from the MP tray support, then close
the MP tray.
c
Press the front cover release button and open
the front cover. Remove the silica gel pack
a .
CAUTION CAUTION
DO NOT eat Silica Pack. Discard immediately.
d
Hold the green handle of the drum unit a and
pull it out until it stops.
e
Gently pull the orange packing material
towards the front of the machine to remove it.
f
Remove the 4 orange packing pieces.
g
Push the drum unit firmly back into the
machine.
h
Close the front cover of the machine.
IMPORTANT
DO NOT connect the AC power cord yet.