Brother DCP-7040 - Manual (Page 69)

Troubleshooting and routine maintenance
57
B
Document jams
(DCP-7040 only)
B
If the document is jammed, follow the steps
below.
Note
After removing a jammed document,
check that no paper scraps are left in the
machine that could cause another jam.
Document is jammed in the top of the
ADF unit
B
a
Take out any paper from the ADF that is
not jammed.
b
Open the ADF cover.
c
Pull the jammed document out to the
left.
d
Close the ADF cover.
e
Press Stop/Exit.
Document is jammed under the
document cover
B
a
Take out any paper from the ADF that is
not jammed.
b
Lift the document cover.
c
Pull the jammed document out to the
right.
d
Close the document cover.
e
Press Stop/Exit.
Document is jammed at the output
tray
B
a
Pull the jammed document out to the
right.
b
Press Stop/Exit.