Brother MFC-240C - Manual (Page 30)

Loading documents and paper
15
2
e
Gently adjust the paper side guides with
both hands and the paper length guide
to the paper.
Make sure the paper side guides touch
the sides of the paper.
Note
Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
f
Put the paper tray cover back down.
g
Slowly push the paper tray completely
into the machine.
h
While holding the paper tray in place,
pull out the paper support (1) until it
clicks and unfold the paper support
flap (2).
Note
Do not use the paper support flap for
Legal paper.
Loading envelopes and post
cards
2
Loading envelopes
2
„ Use envelopes that weigh from 20 to 25 lb
(75 to 95 g/m
2
).
„ Some envelopes need margin settings to
be set in the application. Make sure you
do a test print first.
CAUTION
Do not use any of the following types of
envelopes, as they will cause paper feed
problems:
• If they are of a baggy construction.
• That are embossed (have raised writing
on them).
• That have clasps or staples.
• That are pre-printed on the inside.
Occasionally you may experience paper
feed problems caused by the thickness,
size and flap shape of the envelopes you
are using.
Glue
2
Double flap
2