Brother MFC-240C - Manual (Page 108)

Troubleshooting and Routine Maintenance
93
e
Put the Jam Clear Cover back on.
Make sure the cover is set properly.
f
Lift the scanner cover (1) from the front
of the machine until it locks securely into
the open position.
Make sure that there is no jammed
paper left in the corners of the machine.
Note
If the paper is jammed under the print
head, unplug the machine from the power
source, then move the print head to take
out the paper.
g
Lift the scanner cover to release the
lock (1). Gently push the scanner cover
support down (2) and close the scanner
cover (3).
h
Slowly push the paper tray completely
into the machine.
Note
Make sure you pull out the paper support
until it clicks.
1