Brother RJ-4040 - Manual (Page 7)

Changing your printer’s network settings
3
2
c
Double-click the unconfigured device.
Note
• If you don’t use a DHCP/BOOTP/RARP server, the device will appear as Unconfigured in the BRAdmin
Light utility screen.
• You can find the node name and MAC Address by printing the Printer Settings. (See Printing the Printer
Set-up Information uu page 10.)
d
Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) for
your print server.
e Click OK.
f With the correctly programmed IP address, you will see the Brother print server in the device list.