Step1 setting up the mfc, 1 attach the adf document output support, 2 install the handset – Brother MFC-7220 User Manual
Page 6: Setting up the mfc, Attach the adf document output support, Install the handset, Step 1, 1attach the adf document output support, 2install the handset
4
Setting Up the MFC
Do NOT connect the interface cable.
Connecting the interface cable is
done during the software
installation process.
1
Pull out the ADF Document Support.
2
Open the control panel cover by lifting it
toward the back.
3
Attach the ADF Document Output Support.
4
Close the control panel cover.
1
Connect the curled handset cord to the MFC
and the other end to the handset.
1
Attach the ADF
Document Output
Support
Control Panel Cover
2
Install the Handset
ADF Document Output Support
Step 1
This manual is related to the following products: