Brother MFC-8870DW - Manual (Page 20)

Installing the Driver & Software
18
STEP 2
Windows
®
W
ind
ows
®
Wi
rel
ess
Ne
tw
o
rk
Note
When the User Account Control screen appears,
click Allow.
18
Choose Wireless Network Connection, and
then click Next.
19
Click on Checked and confirmed check box,
and then click Next.
20
After reading and accepting the ScanSoft™
PaperPort™ SE License Agreement, click
Yes.
21
The installation of PaperPort™ 11SE will
automatically start and is followed by the
installation of MFL-Pro Suite.
22
When the Brother MFL-Pro Suite Software
License Agreement window appears, click Yes
if you agree to the Software License
Agreement.
23
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another. Please wait, it will
take a few seconds for all the screens to
appear.
Improper Setup
• DO NOT try to cancel any of the screens during
this installation.
• If your wireless settings fail, an error message
will appear during the installation of MFL-Pro
Suite and the installation will be terminated. If
you encounter this failure, please go to step
1
and setup the wireless connection again.
24
Choose the machine from the list, and then
click Next.
Note
If the machine is configured for your network,
choose the machine from the list, and then click
Next.
This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically.
If your machine shows APIPA in the IP Address
field, click Configure IP Address and enter an IP
address for your machine that is suitable for your
network.