Brother MFC-8670DN - Manual (Page 6)

4
Setting Up the machine
Do NOT connect the interface cable.
Connecting the interface cable is
done during the software
installation process.
1
Open the front cover by pressing the front
cover release button (1).
2
Unpack the drum unit and toner cartridge
assembly.
3
Gently rock the drum assembly from side to
side several times to distribute the toner
evenly inside the assembly.
4
Put the drum unit assembly into the
machine until it clicks into place.
5
Close the front cover of the machine.
1 Install the Drum Unit and Toner Cartridge Assembly
(1)
Step 1