Brother MFC-L8600CDW - Manual (Page 88)

82
Calibration
A
The output density for each color may vary
depending on the machine’s environment,
such as temperature and humidity.
Calibration helps you to improve the color
density.
a
Press .
b
Press Calibration.
c
Press Calibrate.
d
Press Yes to confirm.
e
The Touchscreen displays Completed.
f
Press .
You can reset the calibration parameters
back to those set at the factory.
a
Press .
b
Press Calibration.
c
Press Reset.
d
Press Yes to confirm.
e
The Touchscreen displays Completed.
f
Press .
NOTE
• If an error message appears, press OK
and try again.
(For more information, see
Basic User's Guide.)
• If you are using the Windows
®
printer
driver, the driver will get the calibration
data automatically if both Use Calibration
Data and Get Device Data
Automatically are selected. The factory
settings are on (see
Software and Network User's Guide).
• If you are using the Macintosh printer
driver, you must perform the calibration
using the Status Monitor. Turn on the
Status Monitor, and then select Color
Calibration from the Control menu
(see Software and Network User's Guide).