Brother MFC-L8600CDW - Manual (Page 14)

Chapter 1
8
Changing the prefix number
1
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Initial Setup.
d
Press Initial Setup.
e
Swipe up or down, or press a or b to
display Dial Prefix.
f
Press Dial Prefix.
g
Press On (or Off).
You can turn off the prefix number by
pressing Off. The prefix number will
remain off until you press On.
h
Press Dial Prefix.
i
Do one of the following using the
Touchscreen's keyboard.
 To change the prefix number, press
d
or c to position the cursor under the
digit to be deleted and press the
Back Space button
. Then press
the correct digit.
Repeat until the prefix number is
correct, and then press OK.
 To exit without making a change,
press OK.
NOTE
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
• If your telephone system requires a time
break recall (hookflash), press ! on the
Touchscreen.
• (Canada only) If pulse dialing mode is on,
# and l are not available to use.
j
Press .