Brother MFC-J870DW - Manual (Page 9)

9
6
Set the date and time
The Touchscreen displays the date and time. You can
also add the current date and time to each fax you
send by setting your Station ID (see step
9).
a
Enter the last two digits of the year on the
Touchscreen, and then press OK.
b
Enter the two digits for the month on the
Touchscreen, and then press OK.
c
Enter the two digits for the day on the
Touchscreen, and then press OK.
d
Enter the time on the Touchscreen in 12-hour
format.
Press to cycle AM and PM.
e
Press OK.
7
Choose your language
(if needed)
a
Press (Settings).
b
Press All Settings.
c
Press a or b to display Initial Setup.
Press Initial Setup.
d
Press a or b to display Local Language.
Press Local Language.
e
Press your language.
f
Press .
(e.g. Enter 1 3 for 2013.)
NOTE
• You can change date, time, or clock type (12h
or 24h) at any time. For more information, see
Setting the date and time in the Basic User’s
Guide.
• If a prompt message appears on the
Touchscreen, read it and press OK to continue.