Brother MFC 7840W - Manual (Page 42)

Chapter 4
28
Setting lock
4
Setting Lock lets you set a password to stop
other people from accidentally changing your
machine settings.
Make a careful note of your password. If you
forget it, please call Brother Customer
Service.
While Setting Lock is On, you cannot change
the following settings without a password:
„ Date/Time
„ Station ID
„ Quick Dial settings
„ Mode Timer
„ Paper Type
„ Paper Size
„ Volume
„ Auto Daylight
„ Ecology
„ LCD Contrast
„ Setting Lock
„ Dial Restriction
„ TX Lock
(MFC-7340, MFC-7345N and MFC-
7440N only)
Setting up the password
4
a
Press Menu, 1, 8, 2.
Security
2.Setting Lock
b
Enter a four-digit number for the
password using numbers 0-9.
Press OK.
c
Re-enter your password when the LCD
shows Verify:.
Press OK.
d
Press Stop/Exit.
Changing your setting lock password
4
a
Press Menu, 1, 8, 2.
Security
2.Setting Lock
b
Press a or b to choose Set Password.
Press OK.
c
Enter your four-digit password.
Press OK.
d
Enter a four-digit number for the new
password.
Press OK.
e
Re-enter your new password when the
LCD shows Verify:.
Press OK.
f
Press Stop/Exit.
Turning setting lock on/off
4
If you enter the wrong password when
following the instructions below, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning setting lock on
4
a
Press Menu, 1, 8, 2.
Security
2.Setting Lock
b
Press a or b to choose On.
Press OK.
c
Enter your four-digit password.
Press OK.
d
Press Stop/Exit.
Turning setting lock off
4
a
Press Menu, 1, 8, 2.
Security
2.Setting Lock
b
Enter your four-digit password.
Press OK twice.
c
Press Stop/Exit.