Brother DS-920DW - Manual (Page 19)

16
Scan Parameters
• Resolution
Click and drag the Resolution slider to choose your ideal resolution. The default value is 200
dpi. Available resolutions are 75, 100, 150, 200, 300, 400 and 600 dpi; options may vary based
on your scanner model.
Image resolution is measured in pixels per inch (ppi), sometimes referred to as dots per inch
(dpi). Higher resolutions result in more detail, slower scanning and, in general, larger file sizes.
For example, a Letter/ A4 size color image scanned at 300 dpi in Color consumes
approximately 25 MB of disk space.
Resolution: 100 dpi Resolution: 200 dpi
• Paper Size
Click the Paper Size drop-down list, and then select your ideal scan size. Options may vary
based on your scanner model. Select Auto Crop and Deskew to automatically adjust the
cropping window, according to document size, and to automatically straighten a skewed or
slanted image. Use this option if you are scanning batches of mixed-sized documents.
• Duplex (for DS-720D and DS-920DW only)
Select the Duplex check box to perform duplex (2-side) scanning.
• Use TWAIN
Select the TWAIN check box to scan based on the scanner’s TWAIN user interface. Once
selected, click Setup to configure more advanced TWAIN settings.
For more information on settings, see the User’s Guide of your scanner.