Brother TD-2020 - Manual (Page 6)

4
CAUTION
„ Printer
Ensure that small children do not put their
fingers in the moving parts or openings of the
printer.
Do not hold the printer with only one hand.
The printer may slip out of your hand.
Do not hold the printer by the RD Roll
compartment top cover. There is a risk of
injury if the cover detaches and the printer
falls.
Put the printer on a flat, stable surface such
as a desk.
Do not put any heavy objects on top of the
printer.
„ Power cord/AC adapter
If the printer will not be used for an extended period, remove the power cord from the electrical
outlet.
„ Tear bar
Do not touch the tear bar directly,
otherwise injury may result.
In order to avoid injuries when the printer is
not being used, install the tear bar cover that
was installed when the printer was
purchased.
„ RD Roll (thermal media roll)
Be careful not to drop the RD Roll. Depending on the area, material, and
environmental conditions, the label may unpeel
or become permanently affixed, and the color
of the label may change or be transferred to
other objects.
Before affixing the label, check the
environmental conditions and the material.
Test the label by affixing a small piece of it to
an inconspicuous area of the intended surface.
Do not place the RD Roll on an unstable
surface, such as an unsteady table or a high
shelf. If it falls or is dropped, injuries may result.
RD Roll is thermal media so the label color
and printing may change or fade if exposed
to sunlight or heat. When using outdoors and
when durability is important, we do not
recommend using the RD Roll.
IMPORTANT
„ Printer
The printer may malfunction if left near a
television, radio, microwave oven, etc. Do
not use the printer near any machine that
can cause electromagnetic interference.
Do not drop, hit or otherwise bang the
printer.
Do not remove the labels affixed to the
printer. These labels provide operational
information and indicate the printer's model
number.
Do not use paint thinner, benzene, alcohol or
any other organic solvents to clean the printer.
Doing so may cause damage to the surface
finish. Use a soft, dry cloth to clean the printer.