Brother MFC-9325CW - Manual (Page 33)

33
Windows
® Wireless Network
Wireless Network
Windows
®
Macintosh
m
Enter the Network Key you wrote down in
step 18-
a on page 28 and then enter the key
again in Confirm Network Key, then click
Next.
n
Click Next. The settings will be sent to your
machine.
o
Disconnect the USB cable between the
computer and the machine.
p
Click Next to continue to install MFL-Pro Suite.
To install MFL-Pro Suite, continue to
step 21- f on page 41.
Now go to
page 41
Note
• The settings will remain unchanged if you click
Cancel.
• If you want to manually enter the IP address
settings of your machine, click Change IP
Address and enter the necessary IP address
settings for your network.
• If the wireless setup failure screen appears,
click Retry.
Wireless setup is now complete. A four
level indicator at the right of your
machine's LCD will show the wireless
signal strength of your access
point/router.