Brother MFC-9325CW - Manual (Page 31)

31
Windows
® Wireless Network
Wireless Network
Windows
®
Macintosh
Configuration using the Installation CD-ROM and temporarily using a USB cable
(For Windows
®
Users)
19
Configure the wireless
settings
a
Put the installation CD-ROM into your CD-ROM
drive. If prompted, select your model and language.
b
Click Initial Installation and then Install
MFL-Pro Suite.
c
Click Yes if you accept the license agreement.
Follow the on-screen instructions.
d
Choose Wireless Network Connection and
then click Next.
e
When this screen appears, choose Change
the Firewall port settings to enable network
connection and continue with the
installation. (Recommended) and click Next.
If you are not using the Windows
®
Firewall, see
the user's guide of your firewall or antivirus
software for information on how to add the
following network ports.
 For network scanning, add UDP port 54925.
 For network PC-Fax receiving, add UDP port
54926.
 If you still have trouble with your network
connection, add UDP port 137.
f
Choose Use your computer or the control
panel directly and click Next.
g
Choose Temporarily use a USB cable
(Recommended) and then click Next.
IMPORTANT
You need to temporarily use a USB cable
during configuration (cable not included).
Note
If the Brother screen does not appear automatically,
go to My Computer (Computer), double-click the
CD-ROM icon, and then double-click start.exe.
Note
For Windows Vista
®
and Windows
®
7, when the
User Account Control screen appears, click
Allow or Yes.